In this example we connect a TM1637 quad 7-segment LED display driver module to a TPyboard, in this case we I used a TPyboard 202 and this was the 7 …
Tag:
micropython
-
-
As mentioned in a previous article we said that the bpi:bit has 25 RGB leds fitted to it, you can see these in the image below This is a basic …
-
In this article I will look at a new board (for me anyway) called the bpi:bit. So what exactly is this board, well this basically looks like a slightly bigger …
-
The next add on board I looked at was essentially an RGB LED ring that you connected to the micro:bit, you attached it and using the supplied screws connected it …
-
This is an interesting add-on for the micro:bit, its a little piano. Lets take a look at it It has the following features micro:bit edge connector, directly pluggable Buzzer to …
-
In this example we connect a BMP280 barometric pressure sensor to an ESP32 running Micropython BMP280 is an absolute barometric pressure sensor especially designed for mobile applications. The sensor module …
-
In this example we connect a Si7021 I2C Humidity and Temperature Sensor to an ESP32 running Micropython The Si7021 I2C Humidity and Temperature Sensor is a monolithic CMOS IC integrating …
-
In this example we connect a Si1145 sensor to an ESP32 running Micropython The Si1145/46/47 is a low-power, reflectance-based, infrared proximity, ultraviolet (UV) index, and ambient light sensor with I2C …
-
In this example we connect a HDC1008 digital humidity sensor to an ESP32 running Micropython The HDC1008 is a digital humidity sensor with integrated temperature sensor that provides excellent measurement …
-
In this example we connect a BMP180 barometric pressure sensor to an ESP32 running Micropython The BMP180 is the new digital barometric pressure sensor of Bosch Sensortec, with a very …