Adafruit Feather M0 and VCNL4040 Proximity Sensor circuitpython example

In this article we connect a VCNL4040 to an Adafruit Feather M0 running Circuitpython

Table of Contents

Sensor Information

The VCNL4040 integrates a proximity sensor (PS), ambientlight sensor (ALS), and a high power IRED into one small package. It incorporates photodiodes, amplifiers, and analog to digital converting circuits into a single chip byCMOS process.

The 16-bit high resolution ALS offersexcellent sensing capabilities with sufficient selections to fulfill most applications whether dark or high transparencylens design.

High and low interrupt thresholds can beprogrammed for both ALS and PS, allowing the component to use a minimal amount of the microcontrollers resources.

The proximity sensor features an intelligent cancellation scheme, so that cross talk phenomenon is eliminated effectively. To accelerate the PS response time, smart persistence prevents the misjudgment of proximity sensing but also keeps a fast response time.

In active force mode, a single measurement can be requested, allowing another good approach for more design flexibility to fulfill different kinds of applications with more power saving.

The patented Filtron technology achieves ambient lightspectral sensitivity closest to real human eye response andoffers the best background light cancellation capability(including sunlight) without utilizing the microcontrollers’resources.

VCNL4040 provides an excellent temperature compensation capability for keeping output stable undervarious temperature configurations. ALS and PS functions are easily set via the simple command format of I2C(SMBus compatible) interface protocol.

Operating voltage ranges from 2.5 V to 3.6 V.

Here is the sensor I purchased from the good folks at Adafruit (via Pimoroni in the UK), there are other similar types of sensors available from other companies

Parts Required

Name	Link
Adafruit Feather M0 Express	Amazon link Ebay link
VCNl4040	Aliexpress product link Amazon link
Connecting cables	Aliexpress product link Amazon.com link Ebay link

Schematic/Connection

I used the Adafruit VCNL4040 sensor and in this case used the Stemma connection

For the STEMMA QT cables, it uses the Qwiic convention:

Black for GND
Red for V+
Blue for SDA
Yellow for SCL

So color coded for ease of use, this layout shows a connection to the module

feather and vcnl4040

Code Example

I used Mu for development

The following is based on a library , I copied the adafruit_vcnl4040.mpy library for this device to the lib folder on my Feather M0 Express – https://circuitpython.org/libraries

This is the basic example which comes with the library

[codesyntax lang=”python”]

import time
import board
import adafruit_vcnl4040

i2c = board.I2C()
sensor = adafruit_vcnl4040.VCNL4040(i2c)

while True:
    print("Proximity:", sensor.proximity)
    print("Light: %d lux" % sensor.lux)
    time.sleep(1.0)

[/codesyntax]

Output

Here is what I saw in Mu REPL window

Proximity: 2
Light: 29 lux
Proximity: 2
Light: 29 lux
Proximity: 2
Light: 29 lux
Proximity: 2
Light: 30 lux

Links

https://www.vishay.com/docs/84274/vcnl4040.pdf